| Subject | Text |
| Not sure if you undrestood about the capacitors; 16volt electolytics on the output line which reads |
| Samsung SV-DVD1EA doens't open | Mine had this problem too. Cause was C32 (1000µF 16V) on the power print. Remove wall plug before se |
|
|
| Re: Please radio code for Ford | [quote:2abf3eb5d0="Dexter81"]Hello
Someone please help me with a radio code for Iveco Blaupunkt |
| I'm lycky enough to have this resellers shop around the corner from home in sweden. :)
[URL]https:/ |
| Kaput like mine | I found a few swollen caps on the DSP board - as you are looking @ the face of the amp its the one o |
| Mended Acer AL1914 | I have successfully fixed my monitor exactly as described above - many thanks for some very good adv |
| Thanks again.
When I unplugged the YSUS, the blue indicator light on the front stays on for abou |
| Thanks!! :D
I already replaced the two resistors RP30 & RP31; RP32 is actually a big-fat 3w r |
| I am looking at the supply voltages for this ic chip and there are two. One is pin 4 that is the sup |
| PSU problem Infocus 5700 - heat up caps works | Hi all, I have an Infocus Screenplay 5700 projector with a PSU problem. It fails to startup unless I |
| code Ford MD 4500 ? | Hello from argentina
I need the code of my radio,
Ford MD4500
96FU-18K876-BB
serial N° : 3AA |
| JVC TV AV-20N1P No Sound problem | I checked that there was no DC in going to the Volume IC (0.01V), it should be around 16V. Now I nee |
| Comb filter repair. Replace
1) 22uF/16V
2) 100uF/6.3V
3) 22uF/16V
4) 1uF/50V
5) 1uF/50V
6) 10 |
| Re: code Ford Visteon CDR4600 please. | [quote:f38c2ffbe1="joe.matias"]I need please code from my card
He is a Ford visteon CDR 4600
Y |
| A 12V 100UF radial mount capacitor I meant. Or can you not get a 12V should I get a 16V. |
| Check/replace C708. Also Replace C5H6 2200 @ 16v, main problem, & D907 change in value (ECG 552) |
| Hi jts725 I d like to thank you for you r tips the power supply had caps at 1500 16v. could not fin |
|
|
| Re: Help with CODE Radio Ford MD 4500 | [quote:b5fbf5cfd1="romeu"]I need help.
It's a radio tape deck Ford MD 4500
And I need his CODE.
S |
| N2750W (PCB fsp204-2f01) - same symptoms, test mode OK? | I am working on a N2750W with the same power problem described in the thread. I have not checked the |
| SOLVED! | Yes... old post. But for posterity's sake, here's how i fixed mine....
Preface: see page 12 of th |
| Replace C411 220uf@16v. |
| Site for wiring guide | Check here: http://www.installdr.com/QuickWiring.html
Look under FORD wiring diagrams. |
| Screen fixed :D | Hi all, to be short : The screen is already fixed :D
I couldn't resist to do some solderworks, s |
| Welcome to my hell. With the back off behind the jack pack is a board labeled MVPU13 OR 14. There a |
| Hannspree JT01-32E2-000G - Viewsonic N3252W | Some info on PSU repair.
These power supplies suffer from Dried up capacitors on the secondary si |
| Just a quick update. I haven't got all the spares yet but happened to have a 16v 220uF in the parts |
| so you replace all of them or just 10uf/16v |
| Re: Bosch Fridge/Freezer Not Working | [quote="Anonymous"]I had this problem with my Bosch Fridge/Freezer. The compressor was rec |